We have 23 guests and no members online
One aspect of absorbent articles that has recently been considered is their disposability. Although such products largely comprise materials which would be expected ultimately to degrade, and although products of this type contribute only a very small percentage of the total solid waste materials generated by consumers each year, nevertheless, there is currently a perceived need to devise such disposable products from materials which are compostable.
A conventional disposable absorbent product is already to a large extent compostable. A typical disposable diaper, for example, consists of about 70% of compostable materials, e.g., wood pulp fibers, and the like. In the composting process soiled disposable absorbent articles are shredded and commingled with organic waste prior to the compostjng per se. After composting is complete, the non-compostable particles are screened out. In this manner even today's absorbent articles can successfully be processed in commercial composting plants.
Nevertheless, there is a need for reducing the amount of non-compostable materials in disposable absorbent articles.
SAP, backsheet and closure system are the parts that are generally made of non-compostable materials.
Recent research is striving to replace polyethylene backsheets in absorbent articles with liquid impervious films of compostable material, because the backsheet is typically one of the largest non-compostable components of a conventional disposable absorbent article.
Let’s have a look at main properties a compostable film has to have in order to be a good candidate to replace conventional backsheets in absorbent articles.
In addition to being compostable, the films employed as backsheets for absorbent articles must satisfy many other performance requirements. For example, the resins should be thermoplastic such that conventional film processing methods can be employed. These methods include cast film and blown film extrusion of single layer structures and cast or blown film coextrusion of multilayer structures. Other methods include extrusion coating of one material on one or both sides of a compostable substrate such as another film, a non-woven fabric, or a paper web.
Properties such as tensile strength, tensile modulus, tear strength, and thermal softening point determine to a large extent how well a film will run on converting lines.
In addition to the aforementioned properties, still other properties are needed to meet the end user requirements of the absorbent article. Film properties such as impact strength, puncture strength, and moisture transmission are important since they influence the absorbent article's durability and containment while being worn.
Once the absorbent article is disposed of and enters a composting process, other properties become important. Regardless of whether incoming waste is preshredded or not, it it important that the film or large film fragments undergo an initial breakup to much smaller particles during the initial stages of composting.
Otherwise, the films or large fragments may be screened out of the compost stream and may never become part of the final compost.
During the initial stages of composting, for example where a Daneco drum is employed, the film is exposed to mechanical action, elevated temperatures, and moisture, in addition to microorganisms.
Any one or two or all three of these elements can be used to promote the initial breakup of the film or large film fragments to much smaller fragments.
Many biodegradable polymers exist which are sensitive to mechanical action or elevated temperatures, or moisture. Many would individually meet the requirements for composting. However, few if any, can meet all processing, converting, end user, and disposal requirements of films suitable for backsheets of absorbent articles.
To meet all these requirements simultaneously in a single film, various biodegradable polymers must be combined in ways which overcome their individual deficiencies but do not compromise the beneficial properties associated with the individual biodegradable polymers.